2 Way 5" Full Range Ceiling Loudspeaker with Line Transformer for Installation Applications (White)
- Compact 2 way full range ceiling loudspeaker for installation applications
- 60 Watts continuous, 240 Watts peak power
- High excursion 5" low frequency driver with high temperature voice coil
- 1" ferrofluid cooled neodymium high frequency driver
- Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
- Low distortion waveguide provides 110º coverage
- Mount ring and ceiling tile rails included
- UL94 V-0 rated ABS front with plated steel fire can enclosure
- Semi matt white finish fits unobtrusively in any environment
- Powder coated perforated steel mesh grille with dust protection
- Phoenix* connector with steel cover and strain relief accepts fire rated cable
- 10-Year Warranty Program*
- Designed and engineered in the U.K.
The 240-Watt TCS52C-T-WH is a high performance 2 way 5" full range ceiling speaker system ideally suited to installed speech and music sound reinforcement applications. Engineered as a 2-way system not requiring any external equalization or filtering, the TCS52C-T-WH can be driven by low impedance amplifiers, or 70V/100V line amplifiers. The TCS52C-T-WH achieves optimal performance when used with a low frequency high pass filter or with TURBOSOUND loudspeaker management systems.
The plated steel fire can enclosure features a powerful, high excursion 5" low frequency driver with a high temperature voice coil, and a 1" ferrofluid cooled neodymium high frequency driver mounted on a 110° low distortion waveguide for optimised dispersion. The TCS52C-TWH provides fast, accurate transient response and superb top end clarity, ensuring virtually distortion-free operation – even in your most demanding distributed sound applications.
Finished in semi matt white, the TCS52C-T-WH can alternately be painted to meet the specific aesthetics of the venue. The UL94 V-0 rated ABS front with plated steel fire can enclosure comes with a dedicated mount ring and ceiling tile rails for ease of installation. Multiple transformer taps are provided for 70 V and 100 V line systems or 16 Ohm direct input. Connections are provided via industry standard Phoenix* blocks for input and link connections to additional enclosures.
Architecture & Engineering SpecificationsThe speaker shall be of the passive two-way ceiling-installed type, consisting of one 5" (127 mm) LF driver, and one 1" (25 mm) HF driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 90 Hz to 20 kHz and within -10 dB from 75 Hz to 20 kHz. Nominal dispersion shall be 110 degrees, @ 6 dB points. Nominal impedance (passive) shall be 16 Ohms. Power handling (passive) shall be 60 Watts continuous, 240 Watts peak. Power handling (100 Volt line): Selectable taps for 60, 30, and 15 Watts continuous. Power handling (70 Volt line): Selectable taps for 60, 30, 15, and 7.5 Watts continuous. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 92 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program at stated amplifier input, shall be: Passive: 116 dB; 100 Volt line: 116, 113, and 110 dB; 70 Volt line: 116, 113, 110, and 107 dB. Dimensions: 268 mm diameter x 188 mm deep (10.6 x 7.4"). Net weight: 3.4 kg (7.5 lbs). The loudspeaker system shall be the TURBOSOUND TCS52C-T-WH. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.
*All third-party trademarks, including, but not limited to Phoenix are trademarks or registered trademarks of their respective owners. Their use neither constitutes a claim of the trademark nor affiliation of the trademark owners with MUSIC Group. Product names are mentioned solely as a reference for compatibility, effects and/or components.Warranty details can be found at music-group.com